Check this out if you might be looking for some big towers.... NQ4I ??
-----Original Message-----
From: mrrc-bounces at contesting.com [mailto:mrrc-bounces at contesting.com] On
Behalf Of Jimk8mr at aol.com
Sent: Sunday, February 07, 2010 10:28 PM
To: mrrc at contesting.com; ncc at contesting.com
Subject: [MRRC] K8CCV Towers
From: kb8nw at barf80.nshore.org
To: nodxa at contesting.com
Sent: 2/7/2010 10:14:02 P.M. Eastern Standard Time
The K8CCV estate in Leetonia Ohio is up for estate sale. Right off Rt
11..west 1 mile on rt 344.. south side of the road.
Tower/ antenna sales via KE8KT..or contact me and i'll get you in
contact to discuss things if your interested.
*********************************************
--- On *Thu, 2/4/10, ke8kt at zoominternet.net /<ke8kt at zoominternet.net>/*
wrote:
From: ke8kt at zoominternet.net <ke8kt at zoominternet.net>
Subject: k8ccv towers
Date: Thursday, February 4, 2010, 8:47 PM
Well, the K8CCV estate is being sold off. At the Tusco, I sold his
Clipperton-L Amp, a well-built home-brew antenna tuner and some
other small stuff. The big stuff, towers and antennas are an
interesting issue!
Towers consist of:
2- self supporting Riverview towers -- 1 is a 100' on the ground and
the other is standing, about 80' good but top 20' (2 sections)
rusted, but the rest should be in good shape. The 2 towers could be
combined in different configurations if desired.
1- Rohn 55, 135' with the 2 ele 80m beam (Telrex antenna & rotator).
The antenna weighs 300 lb and the boom is 42' long with elements 65'
lg. ( I have manual)
1- Rohn 45, 135' (maybe 145') with a 5 ele 15m beam and a 5 ele 10m
beam above that (both telrex) & telrex rotator.
1- commercial tower 200' with a 36" face.. It has the 6 ele 20m beam
(Telrex) with a cushcraft 4 ele 10m beam above that. Rotator is a
BIG Hy-Gain rotator. Tri-County put up this tower (i helped Doug on
the tower) and while their gin pole was still on the tower, Dick and
I with some help put up the beams.
1- 4-legged 140' self-supporter ( came from Hell, Michigan )
originally 160' used as a Christian broadcast tower/antenna
algle-iron construction with a Telrex 3 ele 40m beam & a telrex
rotator. I put it together piece-by-piece from a dill tower up the
middle.
Then there is the 160m 4-square vertical system (125' ea) made from
3 dill towers & a 4th tower of similar construction but a 18" face
(heavier construction), all on 12" insulators.
Also 1 more 125' dill tower by itself.
I figure I am going to drop the last one, lift the four square
towers off the insulators and then drop them. I don't think the 3
dills are climbable.
So that's the scoop. I can take down the Rohn towers with help, but
the commercial tower weighs 300# per section.
Let me know if there is any interest.
CUL,
Dave
_______________________________________________
MRRC mailing list
MRRC at contesting.com
http://lists.contesting.com/mailman/listinfo/mrrc
|