----- Forwarded Message ----
From: Mark Luhrman <w4svo at att.net>
To: lz1jy at dir.bg
Sent: Fri, October 22, 2010 12:15:09 AM
Subject: 40/80 Meter array
I use two of these. On 40 they are a 1/4 wave apart and on 80 they are 1/8
apart. On 40 I am feeding them with 84 degree lines and a 71 degree delay line
that is switched in. On 80 I am feeding them with? 157 degree lines and a 39
degree delay line that is switched in. I use 2 seperate relays to switch the
feed lines from 40 to 80 at the base of each vertical?and a sperate box to
switch the 40 mtr box to the 80 mtr. box. I can go NE<SW and feed them in phase
on both bands. It took a lot of planning and work to get this system going. In
US dollars it cost me about $750 not including the verticals and the 40 mtr
system. Mark W4SVO
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.contesting.com/pipermail/secc/attachments/20101021/66fa9c8c/attachment-0001.html
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 40-80 Meter Vertical Phasing System 001.jpg
Type: image/jpeg
Size: 127066 bytes
Desc: not available
Url :
http://lists.contesting.com/pipermail/secc/attachments/20101021/66fa9c8c/attachment-0002.jpg
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 4080 Meter Vertical 001.jpg
Type: image/jpeg
Size: 23938 bytes
Desc: not available
Url :
http://lists.contesting.com/pipermail/secc/attachments/20101021/66fa9c8c/attachment-0003.jpg
|
