I have 2 items for sale.
1. A KLM rotatable 40-Meter dipole. Total length is a little over 46-feet
and uses linear loading. If you remove the linear loading rods and
jumper across the insulator it should make a good full size 30-Meter
rotatable dipole. The lengths of the element has more adjustment
in them and should reach about 49 to 50 feet.
2. Solid state amplifier made by Henry Electronics as a driver for a
4CX1000 used in medical equipment. Includes power supply that
requires 220V input. However another supply such as a Astron
that supplies 13.8 volts at about 20 amps would work. Nominal
output rating is 100 wts but I have run it at 150 wts and seen as
much as 200 wts out on a Bird meter. Uses CD7012 transistors,
which are the same as MRF454 or 2N5460. It now has a output
filter circuit that will pass 10 to about 20 MHz. For use on other bands
a different passband circuit would be required
This would be a good project for some QRP'er who wanted to
occasionally jump up to 100 to 150 wts. Unit is built in a frame
but no cabinet.
If interested give me a call at 770-993-1767 of reply by e-mail.
Jim K4DLI
-------------- next part --------------
A non-text attachment was scrubbed...
Name: k4dli.vcf
Type: text/x-vcard
Size: 84 bytes
Desc: not available
Url :
http://lists.contesting.com/pipermail/secc/attachments/20100801/6ebcbb59/attachment.vcf
|