Between Jim/N3BB and Tree, I think I've in the TRLog Sprint SO2R mindset
now.
It was all in the way I was doing it and now that I know not to F7/8 until
the exchange is being sent to me in the second QSO of the 'couplet' as Jim
called it, it seems to work.
And, I have a couple of days to practice now...Usually, at this stage of my
sudden comprehension of a new concept/procedure, it's only 15 minutes before
the contest!!!
73,
Dale, kg5u
> -----Original Message-----
> From: Tree [mailto:tree@kkn.net]
> Sent: Friday, February 09, 2007 10:27 AM
> To: Dale Martin
> Cc: trlog@contesting.com
> Subject: Re: [Trlog] Sprint CQ using f7/f8
>
> On Fri, Feb 09, 2007 at 09:22:28AM -0600, Dale Martin wrote:
>
> > I read up on Tree's paper on using F7/F8 in Sprint.
> >
> > I created a sprint cfg in Trlog 6.85.
> >
> > When CQ'ing on radio1 using F1 and entering a call<enter> as if a
> > station answered my cq on radio2, the station's call and my
> exchange
> > are appended to the end of the cq on radio1. It doesn't
> automatically
> > switch to radio2 to answer the caller there: neither the
> trlog screen
> > display of the active radio nor actual radio switching takes place.
>
> This doesn't make sense to me. You would not be CQing on
> radio 1 using F1 if you had previously called a CQ on radio 2
> - using F7/F8. Please describe the operating scenario that
> made you do this.
>
> > When CQ'ing using F7/F8 to CQ on radio2 (inactive radio)
> and entering
> > a call while the CQ is happening, the first letter of the
> call stops
> > the CQ and the
> > radio2 switches to become the active radio.
>
> This is because you have TWO RADIO MODE on I believe.
>
> > This is the second sprint setup in trlog I have tried; the
> first was
> > in 6.79 and that worked differently, but didn't work as
> described in
> > Tree's writeup, either.
>
> There might be something wrong with 6.85 - which I would like
> to understand.
>
> > The CQ's in F7/F8 of the CQ and EX modes are as Trlog set
> them up. I
> > haven't messed with them.
> >
> > Here's my most of my 07nascw1.cfg. Can anyone see where I may have
> > gone astray? I only added Possible call colors and the
> Relay Control
> > Port assignment (otherwise, there was no radio keying switching).
> > Turning on/off Two Radio Mode and/or Skip Active Band made
> no difference.
>
> Well, I think turning off TWO RADIO MODE is a good first
> step. This should not be turned on for the sprint.
>
> Perhaps a hint is that you really can only be CQing on one
> band at a time.
> You should do that with F7/F8 and S&P on your active band.
> You either find someone to call on the active band (pressing
> SPACE BAR to call him), or someone answers your F7/F8 cq on
> the inactive band. You should not be a position to enter a
> callsign while a CQ is happening.
>
> The program is used in a totally different way in the sprint
> - almost upside down and backwards from how it gets used in the SS.
>
> Tree
>
_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog
|