Another twist on this would be to allow an option that would
normalize the QSO rate to equivalent number of 3 point QSOs.
IOW, if you were running 2 pointers at 150 QSO/HR the display
would read 100/HR. If you were running 0 pointers at any rate,
the display would read zero.
73 de Mike, W4EF.....................................
----- Original Message -----
From: "Juhan Poldvere" <juhan@chem.ut.ee>
To: <trlog@contesting.com>
Sent: Thursday, December 18, 2003 2:38 PM
Subject: Re: [Trlog] TRLog suggestion for WW contests
>
> Mike, N7MH:
> >N9RV said:
> >>The EU guys might want some further information on "point rates" versus
> >>"QSO rates" ...
> >
> >That already exists by setting RATE DISPLAY = QSO POINTS. If you
mentally divide by 3 then you get an equivalent QSO rate.
>
> ...if you are physically located in Africa. From Europe, the average QSO
> point value is very seldom 3.
>
> IMO, there is ample space around the rate windo to show both rates.
> Discard the RATE DISPLAY =, or have RATE DISPLAY =QSO POINTS/
> QSOs/BOTH.
>
> Seasons greetings,
> --
> Juhan ES5QX
>
>
> _______________________________________________
> Trlog mailing list
> Trlog@contesting.com
> http://lists.contesting.com/mailman/listinfo/trlog
>
_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog
|