Gary,
I read your e-mail to the cluster regarding getting Wintelnetx talking to Tr.
As per your suggestion, I also found it critical to have the COM port on the
Windows machine and the COM port on the DOS machine running Tr to be
identical. One issue I found with the current version (4.09) of Wintenetx is
defeating handshaking protocols (e.g, XON/XOFF, etc) in the Wintelnetx setup
window. When I tried to input Tr's default setting (2400/7/1/E) in the setup
window, there was no option in the Wintelx setup window for NOTselecting some
protocol. I got around this by using an 8 bit packet setting (in my case,
4800/8/0/N), which did not addtionally require inputing any handshaking
protocol. The baud rate and 8 bit packet setting were enabled in my
STDCFG.DAT file.
I got the programs talking together, but am having problems with the Tr's
sign-on terminal program (i.e., CTRL-B) scrolling. As you suggested, I
enabled ADD LF, and ADD CR, but still find I have to manually hit the ENTER
key multiple times to get the screen to display spots. I can do a SH/DX from
within the CTRL-B screen, but again this requires multiple hits of the ENTER
key.
I was wondering if you had any further suggestions?
Thanks, Geo K2ONP
|