Martin,
<< Now there are two ways only: QSL (Enter) or Quick QSL >>
Not quite, there are three actually. The " log but don't QSL" command is
Ctrl|Enter, but as far as I am aware is not documented (Doc QSL?) ; I find
this invaluable for paddle working.
Thus you could presently go two ways.
1. Send your custom QSL message on the paddle, and then log the QSO using
Ctrl|Enter ( or the other way around)
2. Programme an EX MEMORY key with (say) TU%, hit that key and then
Ctrl|Enter ( or the other way around)
I thought it would be possible to programme Ctrl|Enter into the message,
but that combo. seems *not* to be recognised ( Tree?)
The above require two key strokes, or some paddle work of course
Good luck, try it!
btw I agree with you about the need for mult. display in WPX, well said!
73
Clive
GW3NJW
Written Sun, 16 May 1999 18:27
gw3njw@bigfoot.com
clive_whelan@btinternet.com
http://www.btinternet.com/~clive_whelan
--
FAQ on WWW: http://www.contesting.com/trlogfaq.html
Submissions: trlog@contesting.com
Administrative requests: trlog-REQUEST@contesting.com
Problems: owner-trlog@contesting.com
Feature Wishlist: http://web.jzap.com/n6tr/trwish.html
|