Jimmy,
Run "TR RESCORE". It will rerun the contest and does the work you would like
to have done. Don't touch the computer until it is done with the log. Then
exit as you would normally exit a contest. The rate can be quite
impressive...4694 Qs/hr when I did it. If something hoses up (like you touch
the keyboard) the original log is stored in PLOGxxxx.dat (xxxx is a sequence
starting with 0001 incrementing up each time you run some POST procedure
against the log).
--
73 es God Bless de KK1L...ron (kk1l@arrl.net) <><
Ron Rossi ASIC PE Test -- IBM Microelectronics
QTH: Jericho, Vermont
My page: http://www.qsl.net/kk1l
>Trying to do the multiplier check in POST. Versions 6.73 and 6.72A will not
>do the check --- says TOO MANY MULTIPLIERS ENABLED.
>
>Is there a way to do this without bypassing the multiplier check?
>
>BTW, George and Ron both took time out of the contest to talk about the
>problem I was having with 6.73 not taking the correct IARU exchange.
>Service like this is hard to beat. Thanks to all who make TR the program of
>choice for this station.
>
>Jimmy Floyd
>NQ4U
>
>_______________________________________________
>Trlog mailing list
>Trlog@contesting.com
>http://lists.contesting.com/mailman/listinfo/trlog
|