On Sat, Oct 29, 2005 at 03:18:07AM -0400, William Liporace - NA2NA wrote:
> I have a few questions so far :-(
> When the DVP is enabled, I hear a drop in my receive audio, any ideas? It is
> a K1EA card with a factory cable for Yaesu.
There is perhaps a slight change in the audio gain when going through the
DVP card. TR set this to a value that was pretty close to "unity" as
a default. Is this a problem that you can't fix by adjusting the AF
gain?
> When I grab a spot on 40 meters, it wants to send it to CW, how do I fix that?
An easy way to fix this is in the control-J menu - BAND MAP SPLIT MODE - set it
to ALWAYS PHONE. The more complicated way is to recalibrate TR's cutoff
frequencies for the mode on 40 meters - but for a single mode contest,
this isn't really necessary.
> With the DVP enabled in S&P, Callsign is sent after a return, but it does not
> send the exchange with the second return. How do I enable that?
You need to program a message for the CQ EXCHANGE and/or S&P Exchange. Go
to the Alt-P menu - select O for Other and then select the message you want
to program. Use Alt-W and Alt-R.
Tree
_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog
|