On Tue, Jun 07, 2022 at 11:09:48AM +0200, Martin Kratoska wrote:
> I have a Microham DXP here that includes a K1EL version 3.1 chip.
This is very interesting.
When w9cf with his winkeyer chip can turn the sidetone on and off.
And I with my full blown Winkeyer USB 3.1 unit can trun the sidetone
on and off but with your Microham you can not. It would be interesting
to understand why that is the case. None of us have a Microham keyer -
so maybe you can see if you can see what part of the trlinux code is
not alowing you to turn the sidetone off.
Have you tried setting the config value for CW TONE = 0?
What version of trlinux are you running.
It would be great to make CW TONE = 0 to work correctly with your DXP.
Yes you could rip out that part of the code from trlinux - it is open
source - and you can alter it as you see fit. But from what I can
tell it is working as intended with the winkeyers that two of us have
for testing.
One other option that comes to mind, if you do not want to help
troubleshoot the code and make it work with the DXP as it does with a
Winkeyer would be to open up your DXP and remove the speaker - since
you do not want to hear sidetone ever - that would be the fastest way
to fix this issue for good with no programing or troubleshooting work.
> works very well, in TR4W with Wine the monitor is turned off after
> starting the program. CQRlog - the monitor is turned off after
> startup. It is enabled only in the TR Log, ported for Linux. Why?
>
> I don't understand why it's not the other way around - by default
> the monitor is turned off and who needs it should turn it on. TR Log
> for Linux behaves exactly the opposite of other programs. Why? I
> don't understand those who want it this way...
>
> Under these circumstances, I have no choice but to either modify the
> relevant piece of code myself or continue to ignore TR Linux and
> give priority to TR4W with Wine.
>
> 73,
> Martin, OK1RR
>
>
> Dne 07. 06. 22 v 1:47 George Fremin III napsal(a):
> >On Mon, Jun 06, 2022 at 10:55:53AM +0200, Martin Kratoska wrote:
> >
> >>can I ask to remove everything concerning sidetone (monitor tone)
> >>from the winkeyer support routine? It is not needed, there is
> >>already the radio sidetone. Why should the keyer beep on the table?
> >
> >I disagree - I think there are times when someone might want to make
> >the keyer sidetone to work. I just had one here - I do not have a
> >radio hooked up but it was a great way to play with the software and
> >prove that I am sending code to the keyer.
> >
> >And you can, as a user, turn off the sidetone in the winkeyer with the
> >ctl-j menu setting. It seems better to have the user in conrol of
> >that and have it work just as it does now.
> >
> >
>
> _______________________________________________
> Trlog mailing list
> Trlog@contesting.com
> http://lists.contesting.com/mailman/listinfo/trlog
--
George Fremin III - K5TR
geoiii@kkn.net
http://www.kkn.net/~k5tr
_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog
|