Tr4W *is* supported. There are a couple guys that are quite active,
N4AF/Howie and NY4I/Tom. There is a forum:
tr4w@googlegroups.com. an alternate email is tr4w-support@googlegroups.com
Usually when I have a connection problem between a logger and a radio the
baud rates aren't matching. You may want to check that and confirm that
the radio is on the port you think it is. I used tr4w for quite a few
years with a TS850 (and a 590 and a K3) before I migrated to TrLinux. it
was solid.
greg/na8v
On Wed, Nov 23, 2022 at 11:41 PM Tree <tree@kkn.net> wrote:
> I think what you are missing is that you should go to TRLog Linux.
>
> Honestly - I hear a lot of bad things about TR4W - and all I can say is
> that I know nothing about it and it isn't getting supported.
>
> TRLog linux is ALIVE!!
>
> Tree
>
> On Wed, Nov 23, 2022 at 4:52 PM David Hoaglin <k1ht58@gmail.com> wrote:
>
> > Hi.
> >
> > I'm changing from TRLog to TR4W. My logging computer has a dual-boot
> setup:
> > DOS or Windows XP. I installed version 4_117.0 of TR4W, and the tr4w
> > Configurations Settings file contains (along with other commands)
> > RADIO ONE TYPE=TS850
> > RADIO ONE CONTROL PORT=SERIAL 1
> > KEYER RADIO ONE OUTPUT PORT=PARALLEL 1
> > TR4W keys the radio as expected, but it does not talk to the radio. For
> the
> > DOS program, my LOGCFG.DAT files contain
> > RADIO ONE CONTROL PORT=SERIAL 1
> > and the DOS program talks to the radio.
> >
> > What am I missing? It's probably something basic, but I would appreciate
> > help. Thanks.
> >
> > 73, Dave K1HT
> > _______________________________________________
> > Trlog mailing list
> > Trlog@contesting.com
> > http://lists.contesting.com/mailman/listinfo/trlog
> >
> _______________________________________________
> Trlog mailing list
> Trlog@contesting.com
> http://lists.contesting.com/mailman/listinfo/trlog
>
_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog
|