Thanks very much for the quick replies. I am glad to see many still monitor
this reflector.
I was pretty sure there was no address and switching serial ports in the
stdcfg.dat has things working. It might have been an old logcfg.dat in the
CQWW dir that still had radio parameters in it but I thought the stdcfg.dat
in the log dir took precedence. Can't remember.
About a week ago I was fooling around with radios and config files and ran
into something similar but no panic then. But today when it happened panic
set it. After I rebooted both the computer and the K3 it is working now!
Not sure what the operator error was but you know in panic mode it could
have been anything.
GL to all.
Mike W9RE
-----Original Message-----
From: Ed Muns [mailto:w0yk@msn.com]
Sent: November 23, 2012 2:42 PM
To: mjwetzel@comcast.net
Cc: Trlog@contesting.com
Subject: RE: [Trlog] K3 Address
Hi, Mike. There is no address, just specify a Kenwood radio such as the
TS-850. And, of course, whatever COM port you have it on.
Ed W0YK
> -----Original Message-----
> From: Trlog [mailto:trlog-bounces@contesting.com] On Behalf
> Of Mike Wetzel
> Sent: Friday, November 23, 2012 11:32 AM
> To: Trlog@contesting.com
> Subject: [Trlog] K3 Address
>
> What is the address in TR for a K3.
>
>
>
> I've screwed mine up somehow and in panic mode.
>
>
>
> Thanks,
>
>
>
> Mike W9RE
>
>
>
> _______________________________________________
> Trlog mailing list
> Trlog@contesting.com
> http://lists.contesting.com/mailman/listinfo/trlog
>
_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog
|