Long shot: try tuning off all of the audio on your PC!
Tom/W4BQF
Chester Alderman
calderman@cox.net
-----Original Message-----
From: tentec-bounces@contesting.com
[mailto:tentec-bounces@contesting.com] On Behalf Of Anthony Bowyer
Sent: Monday, February 24, 2003 9:22 PM
To: tentec@contesting.com
Subject: [TenTec] Omni V.9 CW Problem
I found out when it is that my Omni V.9 has the CW cut
out problem I mentioned in a previous post. It's when
I'm running logging software that polls the serial
port while the rig is transmitting. I'm not sure why
this started. As I mentioned I just had it aligned. It
worked fine before that. Has anyone else with the V.9
upgrade ran into this problem? It will transmit fine
until the logging software is running and polling the
port. I use N1MM Logger most of the time, but it does
it with another package as well. I can change the
polling rate with the other package, and that helps,
but doesn't solve the problem. Any help would be
appreciated.
Anthony
=====
NT4X
__________________________________________________
Do you Yahoo!?
Yahoo! Tax Center - forms, calculators, tips, more
http://taxes.yahoo.com/
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|