The repetition rate varies, but seems to increase as spikes on the sweep
display increase. It varies from roughly 2 to 10 clicks per second. A
Master reset does not cure the problem. The sweep range seems to make
no
difference, and it occurs with either VFO in use. The same sound is
heard
using an 8 ohm headset. It cannot be heard on the speaker.
Since it can only be heard on quiet bands with the volume up over
halfway,
it is not a major problem. I rarely use the sweep function anyway.
Thanks, Jess W8JY
-----Original Message-----
From: tentec-bounces@contesting.com
[mailto:tentec-bounces@contesting.com] On Behalf Of Grant Youngman
Sent: Monday, March 08, 2004 16:13
To: tentec@contesting.com
Subject: RE: [TenTec] Orion Sweep
> The phones are 72 ohm impedence. This clicking occurs in all modes
> that I have used (USB, LSB, UCW & LCW). Filter selection does not
> make a difference. It is noticeable on any quiet band with the volume
> turned up above halfway.
Interesting. Tried it again with the volume way up, but can't hear any
clicks.
What's the repitition rate?
Probably worth some discussion with T-T if it does seem to be a radio
issue. I don't recall anyone else mentioning something like that ...
which
doesn't mean there isn't a problem.
Grant/NQ5T
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|