Well, the problem is now solved and the Orion is updated and
communicating with my computer. Thanks to everyone and their helpful
suggestions. Paul at Ten-Tec suggested that I disable all my virus
checking and firewall programs. Deleted the previous program and
download, re downloaded and installed, and the Orion accepted the
update! Evidently my anti-virus program (Norton) was somehow corrupting
the download file. A master reset after the download was processed
cleared up any additional quirks, and now the Orion is working great.
No problems with the upgrade after FINALLY getting it installed. The
stepping works fine.
Thanks again,
Jess, W8JY
-----Original Message-----
From: tentec-bounces@contesting.com
[mailto:tentec-bounces@contesting.com] On Behalf Of Jess Young
Sent: Wednesday, May 19, 2004 23:30
To: tentec@contesting.com
Subject: RE: [TenTec] New Orion Firmware
Checked that, and it is correct. The com port will work with other
devices, and worked fine with the Orion until I tried the flash update.
The problem seems to be internal to the Orion. Guess I will have to
call Ten-Tec tomorrow and see if they have any ideas. Incidentally,
NONE of my 8 com ports will communicate with the Orion now.
Thanks,
Jess W8JY
-----Original Message-----
From: tentec-bounces@contesting.com
[mailto:tentec-bounces@contesting.com] On Behalf Of Richard Detweiler
Sent: Wednesday, May 19, 2004 23:20
To: tentec@contesting.com
Subject: RE: [TenTec] New Orion Firmware
This may be something to look at,
Try in the upate utility settings / setup to insure it is pointed to the
right com port.
73's
Rich
K5SF
>From: "Jess Young" <w8jy@starband.net>
>Reply-To: tentec@contesting.com
>To: <tentec@contesting.com>
>Subject: RE: [TenTec] New Orion Firmware
>Date: Wed, 19 May 2004 22:13:07 -0400
>
>I have encountered an interesting problem. My Orion was communicating
>with my logging program before I shut the program down to download the
>Firmware update. When trying to install, the program says it cannot
>communicate with the Orion. Tried a master reset, rebooted the
>computer, etc. The logging program now tells me the port is already in
>use. Still can't install the new update. Any suggestions?
>
>Thanks,
>
>Jess, W8JY
>
>-----Original Message-----
>From: tentec-bounces@contesting.com
>[mailto:tentec-bounces@contesting.com] On Behalf Of J. Crit Harley
>Sent: Wednesday, May 19, 2004 21:44
>To: tentec@contesting.com
>Subject: [TenTec] New Orion Firmware
>
>Well, downloaded from net okay and uploaded to rig okay.
>BUT on tuning there is no difference in tuning rate whether use step 1,
>10
>or 100. All step as if set at a step rate of 100. No fine tuning.
>Did I miss something?
>73/Crit/K4BXN
>
>--
>Using Opera's revolutionary e-mail client: http://www.opera.com/m2/
>
>_______________________________________________
>TenTec mailing list
>TenTec@contesting.com
>http://lists.contesting.com/mailman/listinfo/tentec
>
>
>_______________________________________________
>TenTec mailing list
>TenTec@contesting.com
>http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|