Bob,
I installed digiKeyer (on an Orion I) last year after Dayton, and it
is still playing well. I use it with WriteLog, DX4WIN, and used WinWarbler
to set it up. If you get stuck, be sure to email Joe at microHam tech
support - he is super. Setting up the virtual com ports isn't rolling off a
log, and it took me a few tries to get it right. (I run FSK RTTY and PSK31
via "afsk" audio.)
73, Duane
Duane Calvin, AC5AA
Austin, Texas
www.ac5aa.com
-----Original Message-----
From: tentec-bounces@contesting.com [mailto:tentec-bounces@contesting.com]
On Behalf Of Robert Redmon
Sent: Saturday, April 21, 2007 5:31 PM
To: tentec@contesting.com
Subject: [TenTec] Digi Keyer and Orion II
I have spent the better part of the day trying to get my new USB DigiKeyer
to communicate with my O2. Have not been able to get HRD or WriteLog to
connect successfully. Was able to get ACLog to read frequency and mode OK,
so it is working after a fashion. Anyone been down this road? Any
suggestions? Please, off list, as I receive the digest.
Bob K5SM
-----Original Message-----
From: tentec-bounces@contesting.com [mailto:tentec-bounces@contesting.com]
On Behalf Of tentec-request@contesting.com
Sent: Saturday, April 21, 2007 11:00 AM
To: tentec@contesting.com
Subject: TenTec Digest, Vol 52, Issue 28
Send TenTec mailing list submissions to
tentec@contesting.com
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.contesting.com/mailman/listinfo/tentec
or, via email, send a message with subject or body 'help' to
tentec-request@contesting.com
You can reach the person managing the list at
tentec-owner@contesting.com
When replying, please edit your Subject line so it is more specific
than "Re: Contents of TenTec digest..."
Today's Topics:
1. Re: Slaving radios (Michael W Elliott)
2. TenTec 299 voice frequency read out FS (Ken Simpson, W8EK)
----------------------------------------------------------------------
Message: 1
Date: Sat, 21 Apr 2007 06:56:45 -0700 (PDT)
From: Michael W Elliott <kq0b@sbcglobal.net>
Subject: Re: [TenTec] Slaving radios
To: Carl Moreschi <n4py@arrl.net>, Discussion of Ten-Tec Equipment
<tentec@contesting.com>
Message-ID: <872200.35248.qm@web80207.mail.mud.yahoo.com>
Content-Type: text/plain; charset=iso-8859-1
Please help me understand why someone would slave a radio
what is the advantage ???
Carl Moreschi <n4py@arrl.net> wrote: Not yet. I should have around it
handling the audio around May 1.
Carl Moreschi N4PY
121 Little Bell Drive
Bell Mountain
Hays, NC 28635
----- Original Message -----
From: "Alan Sewell"
To: "Discussion of Ten-Tec Equipment"
Sent: Friday, April 20, 2007 11:33 PM
Subject: Re: [TenTec] Slaving radios
> Carl,
>
> Is your Omni VII program handling the audio over the ethernet connection
> now? The last I heard you were working on it.
>
> 73,
>
> Alan N5NA
>
> http://www.tentecwiki.org
>
>
>
> Carl Moreschi wrote:
> > You can do it several ways. If the O7 is near your computer, you can
just
> > connect a serial port from the computer to the O7. I think the limit on
a
> > serial cable is about 50 feet. If the O7 is 1200 feet from the shack,
you
> > can run an ethernet cable from the computer to the O7. My N4PY software
> > will then control the radio very nicely. My webpage is at www.n4py.com
> >
> >
> > Carl Moreschi N4PY
> > 121 Little Bell Drive
> > Bell Mountain
> > Hays, NC 28635
> >
> >
> >
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
Michael W. Elliott, CISSP
(Certified Information Security Specialist Professional)
THE INSIDE ADVANTAGE -
RETIREMENT - LEISURE, REST and ONLY ELECTRONIC MAIL PAYMENTS
Servant to Bridgett, Collin and all my Creditors
St. Louis County Missouri
------------------------------
Message: 2
Date: Sat, 21 Apr 2007 11:12:27 -0400
From: "Ken Simpson, W8EK" <W8EK@speakeasy.net>
Subject: [TenTec] TenTec 299 voice frequency read out FS
To: "TenTec List at contesting (TenTec List at contesting)"
<tentec@contesting.com>
Message-ID: <008201c78427$7a153670$f801000a@kendell>
Content-Type: text/plain; charset="US-ASCII"
For Sale:
TenTec 299 Voice synthesized frequency read out
This unit is used with the TenTec Omni 546 series A, B, C,
some Argonauts, Corsair, and others. It will work with
other rigs (such as the Triton), with minor mods to get
the right connections.
The 299 is used primarily for blind hams who can not read the
frequency readout on the transceiver. By pushing a button, it
will "speak" the frequency (to tenth of a KHz). A front panel
switch permits selection of the entire frequency, or you can
eliminate the MHz, and give only the KHz. There is also a
volume control on the front panel.
Of course it can also be used to give a "voice digital readout"
to any rig with an analog dial, or used as a normal frequency
counter.
This particular unit is in great shape electrically. Cosmetically
it looks very nice, but has some very minor wear.
$ 190 plus shipping from Florida.
Thanks.
73,
Ken, W8EK
Ken Simpson
E-mail to W8EK@speakeasy.net or W8EK@arrl.net
Voice Phone (352) 732-8400
------------------------------
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
End of TenTec Digest, Vol 52, Issue 28
**************************************
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|