Interesting.......because my 238 tuner has a slide-rule dial which is
numbered 0 - 30 on a linear scale. I have no problem returning to a
previously known position. I use a 1/2 wave on 160M (256 ft) center fed
with balanced wire feed. Work all bands, 160M -> 10M with good results and
run a Centurion amp when additional power is required.
73
Bob K4TAX
----- Original Message -----
From: "wd3qerolscom" <wd3q@erols.com>
To: "tenteccontestingcom" <tentec@contesting.com>
Sent: Wednesday, February 06, 2002 10:33 PM
Subject: [TenTec] Turns Counter for 238?
> One of my hangups with the otherwise fine 238 tuner is that I can't find
old/previous settings on the inductor. There's no counter.
>
> Is putting one in practical or possible? Has anyone done it?
>
> In lieu of messing up the front panel (and more, I suspect), has anyone
figured out a way to remember old settings?
>
> Thanks in advance,
>
> Eric W3DQ
> Washington, DC
>
> --------------------------------------------------------------------
> mail2web - Check your email from the web at
> http://mail2web.com/ .
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
|