I think TT recommends judicious use of DeOxit (formerly called Cramolin)
forclening contacts. It is now stocked by MCM electronics.
-----Original Message-----
From: Steve Ellington N4LQ <N4LQ@iglou.com>
To: TenTec@Contesting.com <tentec@contesting.com>
To: <tentec@contesting.com>
Date: Thursday, February 25, 1999 4:12 AM
Subject: [TenTec] On Contact Cleaning
>
>First let me quote from page 5-2 or the Delta 580's manual. This same quote
>is in most TT manuals.
>
>Rotary Switch Care
>
>"Selector switches are specially lubricated by the manufacturer for maximim
>life. Brushing on or dipping switch in solvents will wash away the special
>lubricants and shorten the life of the switch. Cleaning rosin from soldered
>connections is not recommended sice there is a hazard of the dissolved
rosin
>running into the switch causing resistance problems. NEVER USE COMMERCIAL
>CONTACT CLEANERS ON SWITCHES."
>
>In my younger days I was guilty of spraying "CONTACT CLEANER" on switches
>and pots. Yes, they would work after a cleaning but only for a short time
>then they would start getting noisy.
>
>Now I know there are all kinds of expensive chemicals on the market and
many
>folks have invested $18 in a spray can of some kind of contact lube and
>swear that nothing equals it but I would like for someone out there to try
>this and just see if it isn't true.
>
>I've been using el-cheapo $1.79 a can WD-40 for several years. I've used it
>on RF switching in linear amps, Front end switches in receivers and all
>kinds of potentiometers and never experienced any reocurring problem. Every
>time, the scratchy, noisy pot or intermittent switch contact has been
>instantly cured of it's ills. WD-40 cleans and lubricates the contact and
it
>is non conductive.
>
>Ok. Now I know there's a lot of experts out there who think they know the
>secret formula for WD-40 but according to their web page www.wd40.com . Not
>only is the formula a secret but the number of people who know the formula
>is a secret.
>Just because it's cheap, don't overlook it. Try some and see what happens.
>
>No flames please. It is flamable. Smells good to!
>
>WD
>
>
>--
>FAQ on WWW: http://www.contesting.com/tentecfaq.htm
>Submissions: tentec@contesting.com
>Administrative requests: tentec-REQUEST@contesting.com
>Problems: owner-tentec@contesting.com
>Search: http://www.contesting.com/km9p/search.htm
>
--
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|