I'm sorry Ralph....I speak in techno-babble all too often ! A TEC is a
thermoelectric cooler. As you probably know, if you apply low voltage DC to
one of these babies, it pumps heat - making one side very cold, and the
other side warm of course. The warm side heat you dump to the nearby air.
The cold side gets applied to whatever it is you want to cool off. They are
pretty cheap too.
73 de Gary, AA2IZ
----- Original Message -----
From: "Ralph" <w8bvh@sbcglobal.net>
To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Sent: Tuesday, March 06, 2007 8:05 PM
Subject: Re: [TenTec] Is there a beefier 2N5301?
> Gary:
> I've been reading this thread with some interest but I don't know what
"TEC"
> is. Can you explain to me?? Thanks for the help.
> Ralph Howes
> W8BVH
>
>
> > To go beyond that, you have to turn to the heat sink itself. Make it
> > bigger. Make it Copper. Give it more and larger fins. Blow air on it.
> > Or - if you really want to do it right, use a TEC for active cooling and
> > make that heat sink really really cold. Just short of the dew point of
> > course. And much more practical than liquid cooling.
> >
> > TEC's really rock when used properly in this manner.
> >
> > 73 de Gary, AA2IZ
> >
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|