TenTec
[Top] [All Lists]

[TenTec] CT 9.37 and OMNI-VI+

To: <tentec@contesting.com>
Subject: [TenTec] CT 9.37 and OMNI-VI+
From: JTBRANNIGAN@prodigy.net (JAMES T BRANNIGAN)
Date: Fri, 4 Sep 1998 10:33:05 -0400

Hi Del,
I just down loaded CT ver 9.37 and I still have a problem with the OMNI-VI
When I use ALT F1 or F2 to change bands the OMNI switches from VFO A to VFO
B and does not change bands...If I hit the band button on the OMNI CT
responds correctly. I had the same problem with CT ver 9.36, but not with
ver 9.27 or earlier.
I switched the radio on and off ....no change...
Bd 1200 radio 4 Cde on
Have you had similiar problems???

73, Jim WB2TPS


>
>I have the latest CT here and no problem at all with the
>OMNI-6. In fact, I've used the SIX with all versions
>from 8.0 up and have never had a problem. Sometimes,
>after starting CT, it will give you the message about the
>radio not responding. Turn the OMNI off and back on and it
>works fine.
>
>By the way - 0n filters, the 1.8 Filter makes a great casual cw filter.
>I find it not much good on ssb, too tight, but great for cw. Contesting
>is done with the two 500 cycle filters and never have to go tighter.
>de KL7HF
>.
>
>>BTW anyone ever get the most CT version to work with the OMNI VI+ ???
>>
>>73, Jim WB2TPS
>>
>
>
>
>--
>FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
>Submissions:              tentec@contesting.com
>Administrative requests:  tentec-REQUEST@contesting.com
>Problems:                 owner-tentec@contesting.com
>Search:                   http://www.contesting.com/km9p/search.htm
>


--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>