Re: [TenTec] rcvr/no audio

["Toby Pennington" <toby423@earthlink.net>]

Skip, Call Paul at TT and tell him what is going on. He can guide you 
through some things you can try to get things straightened out.
This is the logical thing to do since all of us posting to this reflector 
could only guess as to what to tell you to do.  I would say that about 75 % 
of the problems encountered are the result of operator error or 
unfamiliarity with the radio. One person posting recently encountered a 
problem after operating only four hours and was so discouraged that he 
posted on e-ham and on this reflector with very negative posts, only to find 
out later that he just needed to do a couple of updates and a master reset 
and the radio worked just fine.

So save yourself some agony and call TT.      Toby W4CAK

----- Original Message ----- 
From: "skip" <k3cc@fast.net>
To: <tentec@contesting.com>
Sent: Monday, September 20, 2004 7:13 PM
Subject: [TenTec] rcvr/no audio


> This is the first weekend I have had the time to play with my Orion.
> After having the sweep on and listening to the Orion and FT 1000MP Mk/V 
> for
> a few hours the Orion audio quit.
>
> I could see movement of the S meter and a hum from the audio but no
> intelligibility.
> I turned off the Orion and it worked fine for another 2 hours and the same
> thing happened.
>
> WHY !!!!!!!!!!!!!!!!!
>
> This is supposed to be a contest grade radio,. which means hours of use.
> It's useless if it only works for a few hours.
>
> de Skip           K3CC
>
> I'm trying to be constructive, however this radio has problems that should
> have been addressed before I got my hands on it.
>
>
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec


_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec