Guys,
Do like I do and use a good quality wireless mic and wireless headphones for
the audio signals.. Works great for 100 feet thru walls..
Thanks and 73's,
Dudley
WA5QPZ
jhurry@austin.rr.com
----- Original Message -----
From: "Mark Erbaugh" <mark@microenh.com>
To: "Bill Ames" <bames@aob.com>; <tentec@contesting.com>
Sent: Wednesday, April 10, 2002 11:07 AM
Subject: Re: [TenTec] Remote Pegasus
> Bill,
>
> Thanks for the suggestion. However, the Pegasus does not have a line
level
> input. The input level on the ACCY jack is actually the same as for the
Mic
> input. Would it be good to boost the mic to line level at the mic end and
> then reduce it back to mic level at the Pegasus end?
>
> 73,
> Mark
>
> ----- Original Message -----
> From: "Bill Ames" <bames@aob.com>
> To: "Mark Erbaugh" <mark@microenh.com>; <tentec@contesting.com>
> Sent: Wednesday, April 10, 2002 11:39 AM
> Subject: RE: [TenTec] Remote Pegasus
>
>
> > I would suggest that you use a mixer or some such device at the remote
end
> > and then you can have a line level signal to feed to the line input. I
> think
> > you will have problems with long runs of the low level mic signals.
> >
> > Bill Ames
> > KB1LG
> >
> > -----Original Message-----
> > From: tentec-admin@contesting.com [mailto:tentec-admin@contesting.com]On
> > Behalf Of Mark Erbaugh
> > Sent: Wednesday, April 10, 2002 11:24 AM
> > To: tentec@contesting.com
> > Subject: [TenTec] Remote Pegasus
> >
> >
> > I would appreciate comments from anyone who has operated their Pegasus
> from
> > a distance. I'm considering trying to run my Pegasus in my basement
shack
> > (where the power, antenna and ground connections are) from the comfort
my
> > home office on the first floor above where it's not so dark and damp
<g>.
> >
> > I figure the run will be around the 25 foot limit for RS232 (although
I've
> > seen it go much further), so I don't see a problem for the computer
> control.
> > I also don't think that there will be a problem with the keyer input. I
> have
> > some 20 foot mini stereo extension cables that should work for that. I'm
> > mostly concerned with the audio both to and from. I don't run QRO and
have
> > never had a problem with RF, but with 25 feet of audio cabling, I may be
> > asking for trouble. Does anyone have a source for long 5 pin DIN to 5
pin
> > DIN cables suitable for the ACCY jack?
> >
> > 73,
> > Mark
> >
> > _______________________________________________
> > TenTec mailing list
> > TenTec@contesting.com
> > http://lists.contesting.com/mailman/listinfo/tentec
> >
> >
> > _______________________________________________
> > TenTec mailing list
> > TenTec@contesting.com
> > http://lists.contesting.com/mailman/listinfo/tentec
> >
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
|