TenTec
[Top] [All Lists]

[TenTec] Orion V1 Code Analysis

To: <tentec@contesting.com>
Subject: [TenTec] Orion V1 Code Analysis
From: "Merle Bone" <merlebone@charter.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Wed, 5 Mar 2008 12:32:13 -0600
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
I recently got a copy of the ARRL 2007 Amateur Radio Handbook for reference. I 
was skimming the book when I ran into Chapter 16 - DSP and Software Radio 
Design - written by Doug Smith (KF6DX). Doug was a key contributor to the Orion 
V1 DSP code (Not the V2 code - which is very different). The Chapter does an 
excellent job of explaining the functionality and design approach used in 
developing the Orion V1 code - although the discussion is intended to be 
"generic." Although all of the chapter is very interesting, V1 firmware users 
will get a good look at the "Noise Reduction" approach in the discussion of 
Fig. 16.28 - An Adaptive Predictor. Page 16.28 gives a very good description of 
the two level AGC code and the very elegant AGC offset code used to eliminate 
AGC pumping from signals that are inside the roofing filter but outside of the 
DSP filter bandwidth. Page 16.16 gives a good description of the Speech 
Processing code, which yields some excellent speech processing perform
 ance. All in all, this chapter gives a very insightful view of the design and 
functionality of the V1 code. 

Doug does an excellent job of walking through the various aspects of the DSP 
based radio. He also did a nice job - all be it unfinished (But outstanding in 
performance) - of developing much of the V1 DSP code.
73, Merle - W0EWM
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>
  • [TenTec] Orion V1 Code Analysis, Merle Bone <=