TenTec
[Top] [All Lists]

[TenTec] TNX FER TIP ON HOUSE WIRING

To: <tentec@contesting.com>
Subject: [TenTec] TNX FER TIP ON HOUSE WIRING
From: kg5u@hal-pc.org (Dale L. Martin)
Date: Sun, 12 Apr 1998 21:21:48 -0500
] TNX FER TIP ON HOUSE WIRING


>Based upon some info passed a week ago I checked the electrical
outlet and
>found that the ground was not connected and the HOT and NEUTRAL
were reversed.
>Fixing this CURED some minor problems including a stray hum.
Goes to show you
>can't assume anything.Always check it out.  Thanks
>Alan KB7MBI

I think Radio Shack, Home Depot, Builder's Square, Ace Hardware
and other carry a neat little device which you can simply plug
into an outlet and get an LED readout of the wiring status of the
outlet.  Very helpful knowing what's what quickly and safely.

Mine's a GRT 500 Circuit Tester, made by GB Electricl, Inc.,
Milwaukee, WI 53209.  I think I got it at an electronic parts
outlet amazingly called Electronic Parts Outlet.

73,
dale, kg5u



--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread] Current Thread [Next in Thread>