TenTec
[Top] [All Lists]

Re: [TenTec] Some progress made! --Omni D low to no power--Crystal Filte

To: "'Discussion of Ten-Tec Equipment'" <tentec@contesting.com>
Subject: Re: [TenTec] Some progress made! --Omni D low to no power--Crystal Filter
From: "Rick - DJ0IP / NJ0IP" <Rick@DJ0IP.de>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Sat, 18 Feb 2012 22:50:21 +0100
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
Scott, invest 20 bucks in a new digital voltmeter.



-----Original Message-----
From: tentec-bounces@contesting.com [mailto:tentec-bounces@contesting.com]
On Behalf Of scottsheppard@videotron.ca
Sent: Saturday, February 18, 2012 9:56 PM
To: tentec@contesting.com
Subject: [TenTec] Some progress made! --Omni D low to no power--Crystal
Filter

I will....right now I am going to take the dog out and get some air!  Even
with the rig off, and both the xtal filter and TX mixer boards removed...the
output pin on the tx mixer is common to ground--all the way to the band pass
filter...the coax on the other side of the xtal filter going to the ssb gen
board is also common to ground with the board in via the pin of the
transformer...I am going to be seeing rg-174 in my sleep!   scott 
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>