TenTec
[Top] [All Lists]

Re: [TenTec] Help with Orion I

To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Subject: Re: [TenTec] Help with Orion I
From: "Robert Higgins" <rwhiggins@bellsouth.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Sat, 21 Jan 2006 12:17:02 -0500
List-post: <mailto:tentec@contesting.com>
  The reciver isn't on mute by any chance? Are the correct antenna/vfo 
selections made?

  73
  Bob K4LW


  >I just acquired an Orion I from a friend who only used it about 6 hours
  > before packing it up for a move 15 months ago. He never got around to
  > unpacking it after the move and I talked him into selling it to me. 
When I
  > got it home and turned it on, I heard some static from the speaker for a 
few
  > seconds and then nothing. Nothing that I have been able to do will 
produce
  > any noise from the speaker and there is no movement in the analogue S 
meter
  > either. The Display works fine and all the controls appear to work, 
except
  > the AF controls, although I do see the audio level indicators on the 
display
  > move across the screen as I turn the audio up. I do get readings on the
  > Sweep display like it is receiving signals. But they are not getting to 
the
  > S-Meter or the speaker. I did a Master Reset but no help. I have been
  > through every menu item. All check out.  I have not tried to transmit 
yet.
  > I have the speaker turned on in the Audio Menu. I a VFO and Antenna 
assigned
  > to the Main or Sub Receiver as required.
  > I have been through the manual three times. I am pretty sure that I have 
all
  > the Menue Items and Controls set correctly.
  > I took the top off and checked  the filters. They are all in place. All
  > cables look plugged in correctly.
  > The only thing that I have found in the manual that might even come 
close to
  > causing a problem like I have described is a reference to the need to 
use a
  > Stereo Plug if one uses Headphones. Appearenty if one uses a Mono Plug, 
it
  > can cause damage to the radio.  I don't use ear phones and did not plug
  > anything into this jack. So I know that is not the problem.  I am using 
the
  > internal speaker.
  > Any ideas from the group? I am still hoping that it is operator problem
  > rather than problems with the radio.
  > Thanks. Charlie Hugg, K5MBX
  > ________________________________
  > See my Signal/One, Collins & Drake
  > Photo Galleries and my Hallicrafters
  > Virtual Museum at http://hug-a-bug.com
  >
  > _______________________________________________
  > TenTec mailing list
  > TenTec@contesting.com
  > http://lists.contesting.com/mailman/listinfo/tentec


--------------------------------------------------------------------------------


_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>