TenTec
[Top] [All Lists]

[TenTec] FS/T: Ten Tec 509 with accessories

To: <tentec@contesting.com>
Subject: [TenTec] FS/T: Ten Tec 509 with accessories
From: Tim Cook" <timcook@erinet.com (Tim Cook)
Date: Mon, 18 Oct 1999 12:37:04 -0400
Excellent condition Ten Tec Argonaut 509 with matching 208 CW filter,  206A
25/100 khz Xtal Calibrator and Turner 350C hand mic.. . It is all original,
including the knobs.  It is serial number 4622 (later one with solid state
T/R board). It also has the larger main tuning knob similar to the Omni
series. Real hot receiver on all bands and puts out at least the specified
power on all bands. It is rated at 2W output, but 3 to 4 watts out is more
common with a 13.8 volt supply. All the lamps work, dial cord is fine and
PTO is smooth.  It looks and works great.  I have documentation for
everything.  Here is a link to one, although not the actual unit, you could
not tell the difference if you had them side by side.
http://asd.state.va.us/tentec/large/509.jpg

$350 for the entire package shipped in the lower 48
 please email direct for more info ..
Thanks
Tim
NZ8J


--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>
  • [TenTec] FS/T: Ten Tec 509 with accessories, <timcook@erinet.com (Tim Cook) <=