TenTec
[Top] [All Lists]

OMNI-VI Cable Diagrams

To: <tentec@contesting.com>
Subject: OMNI-VI Cable Diagrams
From: kg5u@hal-pc.org (Dale Martin)
Date: Tue, 18 Jun 1996 20:39:47 -0500
I can testify that Warren is correct!  I wired a DB9-to-DB25 adapter =
cable for my DB25-to-DB25 radio control cable.  The adapter cable did =
not work. =20

Then I saw Warren's message this evening, swapped pins 2 and 3 of=20
the DB9 and Bingo! The radio and NA talk to each other.  Thanks, =
Warren!!

The OMNI VI Manual is dead wrong on the DB9 pin-out.

73,
Dale Martin, KG5U
kg5u@hal-pc.org
homepage: http://www.hal-pc.org/~kg5u


----------
From:   Warren Walsh[SMTP:wwalsh@intac.com]
Sent:   Tuesday, June 18, 1996 5:07 AM
To:     tentec@akorn.net
Cc:     na-user@ve7tcp.ampr.org; ct-user@ve7tcp.ampr.org
Subject:        OMNI-VI Cable Diagrams

The following diagrams are for cables I have used with my OMNI-VI.  They
work with CT8, CT9, NA8, and NA9, and they also work with my everyday
logging program - Hyperlog and my beta version of Hyperlog Pro. As for
computers I've used everything from a old 286 to a Pentium 100.  I've =
also
used this setup in M/M situations at N2RM, and for FD with WA2SNA and =
had no
problems.

    DB9 Female   to     DB25 Male          =20
    PC COM              OMNI-VI
    Pin 2               Pin 3
    Pin 3               Pin 2
    Pin 5               Pin 7

    DB25 Female  to     DB25 Male
    PC COM              OMNI-VI
    Pin 2               Pin 2
    Pin 3               Pin 3
    Pin 7               Pin 7

Use three conductor shielded cable and terminate the shield to the =
connector
hood. If anyone has any questions please feel free to ask.

73,
Warren Walsh - N2BCC
wwalsh@intac.com


--
Submissions:              na-user@ve7tcp.ampr.org
Administrative requests:  na-user-REQUEST@ve7tcp.ampr.org
Questions:                owner-na-user@ve7tcp.ampr.org




<Prev in Thread] Current Thread [Next in Thread>