TenTec
[Top] [All Lists]

Re: [TenTec] mics that work with delta 580

To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Subject: Re: [TenTec] mics that work with delta 580
From: "Mike Brown" <k9mi@sbcglobal.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Fri, 7 Sep 2007 02:36:08 -0000
List-post: <mailto:tentec@contesting.com>
Just to see if it works at all, any mic should do. Maybe even the Electro Voice is wired up wrong or has a wire broken off? Should at least be able to find out if it's the rig or mic.

Mike, K9MI


----- Original Message ----- From: "john ferro" <foxbat426@hotmail.com>
To: <tentec@contesting.com>
Sent: Friday, September 07, 2007 00:53
Subject: [TenTec] mics that work with delta 580


it seems the mic the guy i purchased this delta from doesn't work - its an
electro voice mic and i get no movement of my swr/power meter when i blow or whistle into it. i can tune up with CW and the carrier is getiing sent fine - when i switch to ssb mode its dead - its either the radio or the mic - is
it possible the mic is wired wrong?  can i wire a yaesu hand mic to work
with this radio or are they externally powered by the radio - just need
something cheap just to eliminate the radio. sorry for all the questions -
very grateful this forum exists - or else i would not know where to turn.

_________________________________________________________________
Get a FREE small business Web site and more from Microsoft® Office Live!
http://clk.atdmt.com/MRT/go/aub0930003811mrt/direct/01/




--------------------------------------------------------------------------------


_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec




<Prev in Thread] Current Thread [Next in Thread>