My Omni-C sets right next to a monitor and the only qrm I hear is on
7028khz. Not a good place for it! This is a MaxTec 17" and it says
"Low Radiation" on the front if that means anything. My Omni gets back
at it on transmit however by putting squiglies across the screen.
Steve N4LQ
----- Original Message -----
From: "Schell, Michael" <Michael_Schell@urmc.rochester.edu>
To: <tentec@contesting.com>
Sent: Tuesday, December 28, 1999 8:11 AM
Subject: [TenTec] RFI from computer monitor
>
> My experience is with monitor interference and an OMNI VI. No
amount of rf
> chokes or faraday shielding reduced the rfi. The rfi was greatly
reduced by
> using an AST VGA Class B monitor. The old AST monitor has metal
shielding
> inside the plastic case. The RFI is barely noticeable, but is still
> detectable.
>
> 73,
>
> Mike KF2LF.
>
> --
> FAQ on WWW: http://www.contesting.com/tentecfaq.htm
> Submissions: tentec@contesting.com
> Administrative requests: tentec-REQUEST@contesting.com
> Problems: owner-tentec@contesting.com
> Search: http://www.contesting.com/km9p/search.htm
>
>
--
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|