TenTec
[Top] [All Lists]

Re: [TenTec] Replacing battery in Orion II

To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Subject: Re: [TenTec] Replacing battery in Orion II
From: "Don Prater" <w4to@tds.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Tue, 16 Feb 2016 15:59:50 -0500
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
Billy,
Thanks to all who replied to my call for help.
Great place for old guy that doesn't think like he use too.
You were right Billy. When I did the RAM clear it ask me if I had a RX366.
I was thinking of the internal sub receiver as the RX366. When I changed the answer from yes to no and finished the procedure all is now ok. Again, thanks a lot to all.

Don...W4TO

-----Original Message----- From: Billy Cox
Sent: Monday, February 15, 2016 10:35 PM
To: Discussion of Ten-Tec Equipment
Subject: Re: [TenTec] Replacing battery in Orion II

Don,

Do you have the optional RX-366
Sub receiver installed?

(Not the factory standard sub-RX)

That setup question is only for IF
you have the optional RX-366 IIRC?

If you have the stock sub-RX ...

Try your setup again, and say NO
when asked about the sub RX.

Let us know what happens please.

Hope this helps!

73 de Billy, AA4NU



On Feb 15, 2016, at 9:22 PM, Don Prater <w4to@tds.net> wrote:

Barry,
Thanks for your reply. I was very careful not to disturb any of the
cables when replacing the battery.  When it ask if there was a
sub receiver I answered yes. When it came up again it indicated
on the display there was a sub receiver. I don't see any s meter
action when I select main ant go to the sub receiver or sub antenna.
I will check the cables again.
Don
-----Original Message----- From: Barry N1EU Sent: Monday, February 15, 2016 4:33 PM To: Discussion of Ten-Tec Equipment Subject: Re: [TenTec] Replacing battery in Orion II
Don, what do you mean it won't "recognize" the subreceiver?

You might want to pull the front panel off and check the cables carefully.

73, Barry N1EU

On Mon, Feb 15, 2016 at 8:38 PM, Don Prater <w4to@tds.net> wrote:

I have replaced the battery in my Orion II.
I have done a RAM clear and Master Reset.
When I turn the radio on all is ok except for the sub receiver.
It will not recognize the sub receiver.
Any idea on what to do next?

Don...W4TO
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>