Hi,
It is R3 on the mixer board and it affects 10, 21 and 28 Mhz bands.
See page 3-7 of the Corsair II manual. Suggest you redo the set up
procedure to exercise the pot.
73
Tim
gm4lmh
--------------------------------------------------
From: "Bob Towers" <mm0rkt@gmx.com>
Sent: Thursday, December 02, 2010 11:01 AM
To: <tentec@contesting.com>
Subject: [TenTec] PTO Rebuild or not
> The warble on my Corsair II was only on certain bands. If I remember
> right, the offending pot on my Corsair II was the pot which supplied a
> preset voltage to the varicap which in turn provided an extra
> capacitance for the frequency offset on the PTO.
>
> The offset is only on some of the bands - can't remember which ones -
> and it was this feature which enabled one of the contributors to this
> forum to spot the source of the problem. At the time I solved it with a
> squirt of switch cleaner but the problem returned so I plucked up
> courage and replaced the pot.
>
> I hope there are other contributors who have better memories than I do
> and can supply more detailed information!
>
> 73
>
> Bob
> MM0RKT
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|