Well, i have a Heath HA-14 and i have an isolation relay between the rig
and the amplifier. The relay in the amplifier is quite noisy, however
when i'm not using the amp, the relay in the rig seems to be quite loud.
Since i have the isolation relay at the power supply to the amplifier, i
was thinking of maybe using a 4N33 optoisolator to replace the relay in
the rig, but was thinking that maybe someone else has come up with
something better. I have no problems working inside the rig. I have
done the INRAD SSB audio mod. utilizing surface mount components and
added the roofing filter mod. with my own switching modification
utilizing the ATTN button and associated LED.
Thank you for any help and for your response.
73 - Paul (N6MYA)
> >As i happen to have an OMNI VI+, i would sure appreciate a point in the
> >correct direction for a replacement to the noisy amp relay.
> >Thank - you.
>
> Tell us a bit more about the type of amp you're trying to interface and your
> level of comfort with soldering/de-soldering a couple components inside the
> rig. I can guide you through this, but you'll need to open the rig and make
> a few minor changes -- all reversible if you later sell it.
>
> Paul, W9AC
>
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|