TenTec
[Top] [All Lists]

Re: [TenTec] Orion

To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] Orion
From: Bob McGraw K4TAX <rmcgraw@blomand.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Thu, 2 Apr 2020 13:01:19 -0500
List-post: <mailto:tentec@contesting.com>
I would take the time and clean connectors.  Do them one at a time. Be careful 
and assure they are seated correctly.  I use contact cleaner applied to a Q-Tip 
and scrub the male pins. Then  exercise the connector on and off of the mating 
connector to wipe the contacts.   NEVER spray anything into the radio. 

Bob, K4TAX


Sent from my iPhone

> On Apr 2, 2020, at 12:20 PM, Byron Cordes via TenTec <tentec@contesting.com> 
> wrote:
> 
> 
> Hello 
> Having a problem with a Orion I  no ptt from Mike plug. Ok no big deal use 
> ptt in back of radio it has worked for 6 weeks that way.  Now no ptt on back 
> of radio or front . Vox  has worked at all times.  
> Did ram and master reset  no good.  Anyone been down this road before ? I’ll 
> probably look at vox first and see where it switches at  and go from there.  
> Any ideas? 
> Thanks 73s Byron AC9PA 
> Sent from my iPad
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec


_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
<Prev in Thread] Current Thread [Next in Thread>