TenTec
[Top] [All Lists]

Re: [TenTec] Omni VI+ 100 hz off exactly on readout

To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] Omni VI+ 100 hz off exactly on readout
From: John King via TenTec <tentec@contesting.com>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Mon, 12 Mar 2018 19:55:42 +0000 (UTC)
List-post: <mailto:tentec@contesting.com>
 To Don and all:
The Omni VI + is low on the following bands by the following amounts:
160 meters................  99 hz low
 80 meters                   100 hz low
20 meters                      60 hz low
17 meters                      60 hz low
15 meters                      50 hz. low
10 meters                      60  hz low
Nothing has ever been adjusted in 25 years since purchased  from Ten Tec. It 
has been back to Ten Tec for service periodically  for updates and a couple of 
minor issues. This is the best transceiver I have ever owned and the easiest to 
use.  A fantastic radio !!
Thanks and 73, John, K5PGW    On ‎Monday‎, ‎March‎ ‎12‎, ‎2018‎ ‎12‎:‎13‎:‎45‎ 
‎PM, Don Rasmussen via TenTec <tentec@contesting.com> wrote:  
 
 

Be sure to check that the difference is seen on all bands, band crystals also 
change sometimes...
de Wb8yqj Don
My 25 year old Omni VI+  has gradually crept up 100 hz on the readout. I have a 
new TCXO that I recently purchased but I would like to make an adjustment to 
bring the BEAUTY UP 100hz so it will read 3.925 instead of 3.924.9 when it is 
in fact receiving on 3.925.
 Thanks and 73, John, K5PGW
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
  
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
<Prev in Thread] Current Thread [Next in Thread>