TenTec
[Top] [All Lists]

Re: [TenTec] OT: cleaners, etc

To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] OT: cleaners, etc
From: d.e.warnick@comcast.net
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Thu, 30 Apr 2009 10:35:42 +0000 (UTC)
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>

Whether new or reused, all antenna connections, especially telescoped tubing 
need to be cleaned. The antiseize greases (I've always used NoALox or PeneTrox, 
but there are many others) designed for aluminum do work. Scotch-brite is an 
excellent burnisher. You can also use 000 or 0000 steel wool, but be sure to 
remove any oil residue from the aluminum after burnishing. When I took my 
Mosley Pro 67 down after 15 years in the air, every (yes every one) connection 
slid apart easily. That grease works. 



I have bought used antennas and had to fight them apart. No wonder they didn't 
work any more. Cleaned and treated with anti-seize they all worked well and 
when it was time  to take them down, the job was easy. More importantly, the 
lack of oxidation provided proper operation. 



Check the electrical department of your local Home Depot, Lowe's, or whatever 
home builders company is in your area. They will have what you need 



Dave 

WA3MKB 


----- Original Message ----- 
From: "Duane Calvin" <ac5aa1@gmail.com> 
To: geraldj@storm.weather.net, "Discussion of Ten-Tec Equipment" 
<tentec@contesting.com> 
Sent: Wednesday, April 29, 2009 10:29:34 PM GMT -05:00 US/Canada Eastern 
Subject: Re: [TenTec] OT: cleaners, etc 

But before you make the new connections, use Scotch-Brite or a steel wire 
brush to burnish the oxide off the aluminum and IMMEDIATELY coat it with 
AlumiNOx or whatever the equivalent aluminum oxidation prevention grease is. 
Do all mating surfaces this way.  I learned this working for a company that 
manufactured power line connectors for Al wire.  I assume that what is true 
at 60 Hz is also true at RF, tho I don't know that for sure.  I've done this 
with my antennas and have not had a problem with them. 

        73, Duane 

Duane Calvin, AC5AA 
Austin, Texas 
www.ac5aa.com   
  

-----Original Message----- 
From: tentec-bounces@contesting.com [mailto:tentec-bounces@contesting.com] 
On Behalf Of Dr. Gerald N. Johnson 
Sent: Wednesday, April 29, 2009 7:04 PM 
To: tentec@contesting.com 
Subject: Re: [TenTec] OT: cleaners, etc 

On Wed, 2009-04-29 at 18:46 -0500, k8bbm@srt.com wrote: 
> getting used beam, suggestions for cleaning and reassembling, 
> also protecting junctions..... 
> deoxit  to clean ends andthen??? 
> thanks 
> Dave K8BBM 
> 
AlnoOx aluminum wire connection grease at the connections and junctions. 

Gerald J. 

_______________________________________________ 
TenTec mailing list 
TenTec@contesting.com 
http://lists.contesting.com/mailman/listinfo/tentec 

_______________________________________________ 
TenTec mailing list 
TenTec@contesting.com 
http://lists.contesting.com/mailman/listinfo/tentec 
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
<Prev in Thread] Current Thread [Next in Thread>