Re: [TenTec] TenTec Titan Meter Lamps

[Jim Brown <k9yc@audiosystemsgroup.com>]

I have three Titans, and meter lamps is something they did differently 
over the years. At one point they used 28V lamps, at others 12V in 
series. They are undoubtedly labeled, so look at them when you open it up.
FWIW, I replaced all my incandescent meter lamps with low current, 
higher voltage to improve life.
73, Jim K9YC

On 4/23/2019 5:55 PM, GARY HUBER wrote:
> The lamps just failed (04/20/19)… both failed so they must be in series, if the 
> circuit is 28 VDC and the lamps are 2 X 12 VDC.
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec