I checked my Omni-V and the output for the mic is 8.6 volts. I wonder
why they now supply only 4.5 volts? Is anyone running a 705 off the
Pegasus with any problems? Perhaps 4.5 is enough to run the 705 from
anyway. What is the voltage out in the mic jack on an Omni-VI anyway?
73 Jeff aa8ve
On Thu, 9 Dec 1999 13:22:19 -0400 (AST) David McClafferty
<at060@chebucto.ns.ca> writes:
>
>
>
> On Thu, 9 Dec 1999, JEFF S JOHNSON wrote:
>
> >
> > I should hope Pegasus has DC voltage out for the Mic. so a battery
> is not
> > needed.
> >
>
> I did not have a battery in my 705 when I used it with the Omni V.
> When I
> got the Pegasus the LED on the 705 base would only glow very dimly
> and
> the rig was obviously not being fully modulated, so I had to put a
> battery
> in. The manual says it provides 4.5 Volts for electret mics.
> Appearently
> that not enough for the 705. I hope that we will get schematics
> someday so
> one could look into modifying such things. I hate batteries, they
> leak and
> ruin a lot of good gear.
>
> 73, Dave, VE1ADH
___________________________________________________________________
Why pay more to get Web access?
Try Juno for FREE -- then it's just $9.95/month if you act NOW!
Get your free software today: http://dl.www.juno.com/dynoget/tagj.
--
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|