TenTec
[Top] [All Lists]

Fwd: [TenTec] Corsair questions- please

To: <tentec@contesting.com>
Subject: Fwd: [TenTec] Corsair questions- please
From: JimN0OCT@aol.com (JimN0OCT@aol.com)
Date: Wed, 1 Sep 1999 17:43:46 EDT

--part1_1c3a0b55.24fef812_boundary
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit

Duh, I forgot to post this to the list.  See below about the memory thing.....

--part1_1c3a0b55.24fef812_boundary
Content-Type: message/rfc822
Content-Disposition: inline

Return-path: JimN0OCT@aol.com
From: JimN0OCT@aol.com
Full-name: JimN0OCT
Message-ID: <24e3a155.24fef704@aol.com>
To: <tentec@contesting.com>
Date: Wed, 1 Sep 1999 17:39:16 EDT
Subject: Re: [TenTec] Corsair questions- please
To: rohre@arlut.utexas.edu
MIME-Version: 1.0
Content-Type: text/plain; charset="ISO-8859-1"
Content-Transfer-Encoding: quoted-printable
X-Mailer: AOL 4.0 for Windows 95 sub 243

HI Stuart,

Both Corsair 1 and 2 cover all the WARC bands.  Standard filters are a 2.4=20
kHz in the 1st [9 MHz] IF, and a 2.1 kHz (?, could be 2.4kHz, I'm doing this=20
from memory) in the PBT board [6.3 MHz IF].  There are provisions for 3=20
additional filters in the PBT board of 1.8, 0.5 and 0.25 kHz.

In SSB mode, [assuming all filters are installed], you can choose between=20
2.1, 1.8 and 0.5 kHz filters. In CW mode, you can choose between 1.8, 0.5,=20
and 0.25 kHz filters.

Anybody feel free to correct this if my memory had failed me.  With old age,=20
one can expect a loss in short term memory, eyesight, muscle flexibility and=20
short term memory.

Jim=20
N=D8OCT

In a message dated 01-Sep-99 16:28:07 Central Daylight Time,=20
rohre@arlut.utexas.edu writes:

> Hi to the group,
>  Can the experts on the Corsair please refresh my memory?
> =20
>  Please?  Do both the Corsair and Cosair II cover all the WARC bands?
>  And what is the "standard" filter set up, if there are options for CW, an=
d=20
> for
>  SSB?
> =20
>  I did look at the unofficial Ten Tec site, and there is only a picture fo=
r=20
> the
>  Corsair, but not a data sheet, or complete spec sheet.
> =20
>  Thanks in advance,
>  Stuart K5KVH
> =20

--part1_1c3a0b55.24fef812_boundary--

--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>