John, when you plug in the headset the internal Pegasus
speaker is disconnected. The audio in the computer speakers
is coming from the connection from the line output of
the Pegasus to the line in on your soundcard. You need to
disconnect that from the computer speakers using the windows
mixer controls. If you leave that connected it will cause
feedback when you use soundcard digital software like psk31
software. The Pegasus volume control changes the audio to
the headset and the internal speaker. It does not change
the line out on the Pegasus.
Peace, Jim FitzSimons W7ANF
10/31/2000 7:28:16 PM, John Watson <kc4tbh@mpinet.net> wrote:
>Having received, and set-up my Pegasus, I noticed that even with
the
>headphones of my Heil Proset plugged in, there is still audio from
>either the radio speaker, & or, the computer speakers. Is this
normal ?
>Also, when I vary the volume, the audio goes from the computer
speakers
>to the Peg's speaker. Is this normal ?
>And lastly, if there is anyone that has a 302 "remote" dial they
are no
>longer using and want to part with it, let me know.
>Thanks for reading my message.
--
FAQ on WWW: http://www.contesting.com/FAQ/tentec
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
|