Lin,
Yes the local ham (George K9WWT) and I are trying to
duplicate the problem as well. Then we can tell TT
how to replicate and hopefully get it addressed.
I have had it happen with notch settings, the
AutoNotch AN and with the BinRX settings. But have
not been able to consistently repicate it either.
Thanks and 73,
John
--- Lin Davis <linbdavis@earthlink.net> wrote:
> John,
> No problem. The noise that occurs is so loud it
> hurts my ears when it happens
> (wearing headphones). I believe that there is a
> combination or combinations of
> settings that case the DSP to get a bad code load
> from the processor, which
> causes the DSP to hang - there is no recovery that I
> can find short of powering
> the rig off and on again, as you have found. Also
> note that the sub receiver
> audio is likewise effected. The rest of the radio
> appears to function normally
> in my case. Next time it happens, I'll make more
> detailed notes and post it here
> and to ditsnbits.
> Also, once it occurs, I can repeatedly make it
> happen by merely cycling through
> the BinRx choices. If it doesn't occur on the first
> time through the choices, it
> does so on the second or sometimes on the third.
> Weird.
>
> 73,
> Lin
> WB1AIW
>
>
>
> John Nason / NA9U wrote:
>
> > Lin,
> >
> > Thanks!! A local ham who has an Orion II and I
> were
> > just discussing this noise that jumps up in the
> > headphones. That makes three of us now.
> >
> > I have only been able to get rid of the noise by
> > turning off the Orion and restarting.
> >
> > 73,
> > John NA9U
> >
> > --- Lin Davis <linbdavis@earthlink.net> wrote:
> >
> >
> >>I also have the white dot next to the STEP value
> on
> >>my Orion II (2.030) using
> >>COLOR 3.
> >>
> >>I also have a rare problem with audio when
> selecting
> >>BinRX=Main (AUDIO Menu) and
> >>is related to having NR and/or Notch on, as far as
> I
> >>can tell. With headphones,
> >>audio turns into very loud "digital" noise which
> >>varies in intensity with the
> >>sweep! When I pull the headphones plug out, the
> >>noise is present through the
> >>speaker.
> >>
> >>73,
> >>Lin
> >>WB1AIW
> >>
> >>John Nason / NA9U wrote:
> >>
> >>
> >>>I have Orion II with 2.030. No white dot but yes
> >>
> >>I
> >>
> >>>drop characters on SEND1, 2 and 3. It is
> >>
> >>intermittent
> >>
> >>>and I never know when its going to happen. Seems
> >>
> >>like
> >>
> >>>the send buttons don't have a high enough
> priority
> >>
> >>to
> >>
> >>>the processor.
> >>>
> >>>73,
> >>>John NA9U
> >>>
> >>>--- George K <w2yj@highstream.net> wrote:
> >>>
> >>>
> >>>
> >>>>I do a lot of contesting and DX'ing and what I
> >>
> >>have
> >>
> >>>>experienced with my new
> >>>>O2 and not with my O1 is that I have my call
> >>
> >>stored
> >>
> >>>>in "SEND1". Every once
> >>>>in a while when I press send1 to send my call it
> >>>>seems to miss the first few
> >>>>characters of my call and I must scramble to
> send
> >>
> >>it
> >>
> >>>>by hand.
> >>>>I upgraded the firmware to 2.030 and it still
> >>>>happens.
> >>>>Has anyone else experienced this?
> >>>>Also, I noticed a small white dot just to the
> >>
> >>right
> >>
> >>>>of the STEP number
> >>>>toward the right hand side of the digit. It may
> be
> >>
> >>a
> >>
> >>>>small thing but does
> >>>>anyone else notice it? It takes a while when the
> >>>>sweep is on to appear. Turn
> >>>>the rig off and back on and it's gone only to
> >>
> >>appear
> >>
> >>>>a while later. Look
> >>>>closely at the far right of the digit. It
> doesn't
> >>>>seem to pop up when the
> >>>>sweep is off.
> >>>>I noticed the same thing on the display O2 at
> >>>>Orlando and mentioned it.
> >>>>George
> >>>>
> >>>>
> >>>>_______________________________________________
> >>>>TenTec mailing list
> >>>>TenTec@contesting.com
> >>
>
>>>http://lists.contesting.com/mailman/listinfo/tentec
> >>>
> >>>
> >>>_______________________________________________
> >>>TenTec mailing list
> >>>TenTec@contesting.com
> >>>
> >>
>
>>http://lists.contesting.com/mailman/listinfo/tentec
> >>
> >>>
> >>_______________________________________________
> >>TenTec mailing list
> >>TenTec@contesting.com
>
>>http://lists.contesting.com/mailman/listinfo/tentec
> >>
> >
> >
> > _______________________________________________
> > TenTec mailing list
> > TenTec@contesting.com
> >
> http://lists.contesting.com/mailman/listinfo/tentec
> >
> >
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|