TenTec
[Top] [All Lists]

Re: [TenTec] pto on corsair lube

To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] pto on corsair lube
From: bruce bennett <k2pdj2000@yahoo.com>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Mon, 20 Feb 2006 07:47:27 -0800 (PST)
List-post: <mailto:tentec@contesting.com>
I have not tried it on a century 21, but have seen
pictures of the pto and it looks identical to my pto.
There is a discription of how to get at the pto of a c
21 at the ten tec museum on line. Even though they
look identical getting to it in the 21 is different
from my corsair.

--- Kent Mandrell <k.mandrell@mchsi.com> wrote:

> Have you tried a chemical fix on the 21?
> 
> ----- Original Message ----- 
> From: "bruce bennett" <k2pdj2000@yahoo.com>
> To: <tentec@contesting.com>
> Sent: Monday, February 20, 2006 8:35 AM
> Subject: [TenTec] pto on corsair lube
> 
> 
> > Not wanting to tear down my pto, I tried to lube
> the
> > shaft of the pto with wd 40. Seemed to help but
> far
> > from curing the freq shifts I was experiencing
> when
> > tuning the rig. So decided to try something
> different.
> > I have on hand a product called Tetra 500. It is a
> > polymer and not a oil. Very fine particles in the
> lube
> > are rubbed into the surface of bearing
> mechanicaly.
> > Since it is synthetic it should not harden. So
> first I
> > sprayed the shaft of the pto with tuner cleaner
> and
> > ran the dial up and down the band several times.
> > Seemed to help loosen up that stiff grease in the
> pto.
> > I then applied one drop of the tetra product with
> a
> > screwdriver and sprayed again with the tuner
> cleaner.
> > My idea was to help the tetra to penetrate into
> the
> > pto, with the thin tuner cleaner, and it seemed to
> > work. I have had this rig since 1984 and can not
> > recall it working any better than it is now. No
> shift
> > in freq and very easy to turn. Will it stiffen up
> in
> > the future? I don't know, but the advertisement
> says
> > tetra is rubbed into the microscopic pores of the
> > metal so I am hopeful that it is a permanent cure.
> Btw
> > i do not sell or work for the company. 
> > 
> > __________________________________________________
> > Do You Yahoo!?
> > Tired of spam?  Yahoo! Mail has the best spam
> protection around 
> > http://mail.yahoo.com 
> > _______________________________________________
> > TenTec mailing list
> > TenTec@contesting.com
> >
> http://lists.contesting.com/mailman/listinfo/tentec
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
> 


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>