TenTec
[Top] [All Lists]

Re: [TenTec] Headphones for ORION I?

To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Subject: Re: [TenTec] Headphones for ORION I?
From: "Jim Brown K9YC" <k9yc@audiosystemsgroup.com>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Thu, 12 Aug 2010 08:30:53 -0700
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
On Thu, 12 Aug 2010 04:12:34 -0500, Dr. Gerald N. Johnson wrote:

>As for the XLR, there are XLR and there are junk that try to pass as 
>XLR. Switchcraft makes lots of good audio connectors but their XLR has 
>too little metal in the female socket pins to be reliable in my experience.

Switchcraft makes at least three grades of XL connectors. The cheapies are 
poor, the others are very good. The other good connector mfr is Neutrik. 
They're the new kid on the block (about 30 years ago), engineering owned and 
managed. Very well run. They're quite active on the AES Standards Committee 
in a very positive way. 

BTW -- I've been an active member of the AES Standards Committee Working 
Group on Microphones for nearly ten years. Engineers from all the REAL mic 
mfrs participate. I've NEVER seen or heard Bob Heil, or anyone from his 
company in those meetings. 

73, Jim K9YC



_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>