At 09:21 AM 9/5/97 -0500, John Holliman wrote:
>The Tentec manaul says a standard 25 pin serial cable is OK for
>connection to a computer, but the diagram in the manual shows some pins
>connected together. Does a special cable have to be wired up for rig
>control of the Omni VI?
>Tnx es 73 de John, WA5TWL
Hi John,
You can use a standard serial cable like TenTec says, but if you are going
to be using any of the contesting software i.e. CT,NA, or TR, then you
should make your own cable. You DO NOT need a null modem cable because
TenTec has already done the necessary crossover of TxD and RxD inside the
OMNI-VI. Your own cable only needs three wires to cover TxD, RxD, and
ground, at the computer end you can jump out the handshaking signals like
they show in the manual. If you are using a DB25 connector at the computer
then just wire pin 2 to 2, 3 to 3, and 7 to 7, for a DB9 at the computer
then its 2 to 3, 3 to 2, and 5 to 7. Hope this helps
73,
Warren - K2BM (ex N2BCC)
wwalsh@intac.com
PS My OMNI is in for option 3, I am number 273 for those waiting.
--
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|