Thanks Joe. That is kind of what I thought as well; when it comes to someone
else's radio, I tend to be a little cautious.
I just printed out the scanned PDF. I am very tempted to "retouch" some of the
scanned photos with better quality ones, and possibly look into redrawing some
of the diagrams, just to avoid this issues in the future. (Besides, seeing an
ad with Scott W4PA featured in the middle of the manual is a little... well,
weird. And out of date)
73
On 03/28/16, Joe Papworth via TenTec wrote:
Mine is poor quality also Ron but it's good enough to see the proper jumper
position.
For high gain, (filters 216, 217, or 219) the jumper goes to the left.
For low gain (filters 218 or 220) the jumper goes to the right.
Later, Joe, K8MP
In a message dated 3/28/2016 10:55:35 A.M. Eastern Daylight Time,
wn3vaw@verizon.net writes:
A friend had me bring my Omni VI Plus manual over to his shack over the
weekend.
He was having trouble reading Figure 1-5, the MHz IF Filter Installation
diagram, from manual Page 1-3 (Page 15 on the PDF printout for those who've
got the scanned downloaded PDF file). He thought his manual might have
been a reproduction or a poor print, so we were hoping that my copy would
show the diagram better.
Unfortunately, it doesn't.
Simply put, it looks like this diagram, and several others, were not as
"dark" as the text & simply didn't print well.
Does anyone have a "good" (ie readable) diagram of this board?
While our main concern was the position of the JG1 and JG2 selectable gain
jumper plugs, it would still be nice to have something that we can
actually read!
73, ron w3wn
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|