I ran into this question a long time ago due to the fact that being hard
of hearing (even with hearing aids) the CW tone I like to listen to is
slightly different (apparently) than what most other people like to
listen to. I solved the problem by just leaving my RIT set to -100
(cycles). This isn't much but it solved the problem. I am now
listening slightly off the frequency I transmit on.
So, I think all you need to do (if your 200-cycle problem continues) is
to just turn the RIT control (down) a bit and make some calls and
everything will be fine once you get your own receive offset properly
adjusted.
YMMV of course, but it has worked for me for a long time.
On 2016-02-29 12:08, Eric Rosenberg wrote:
When running during the CQ 160 contest this past weekend, I noticed
that
just about everyone coming back to me was approx 200 hz down from my
transit frequency.
I don't remember if this is the case on other bands (or USB), but if it
is,
is there a way to set this offset?
Tnx & 73,
Eric W3DQ
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|