Hi Ken:
Looking over my Ten Tec paperwork I cannot find the 1150 I did however find a
spec sheet on the 1140. The 1140 is a magnetic circuit breaker designed to be
placed i series with the Power lead and Radio. It is not an over voltage
protector. Its ratings are:
Normal operation is nominal 18 amps the Trip rating is 24.3 amps. I can only
describe the 1140 as looking like a toggle switch. I hope this will be if some
assistance to you......joe
Ken wrote:
> Anyone have the docs for the Ten-Tec 1150 over voltage protector?
>
> The one I have acquired was taken out of the metal box and only has two
> short pieces of red wire connected to it. Looks in good condition and the
> fuse is good. I want to put it in a power supply but not sure which wire is
> input or output. I'm guessing on the way it should mount back in the TT
> metal box.. If I have it correct, looking at the PCB with the fuse to the
> towards me, (top of the box)the input is to the left and the output to the
> right.
>
> Have I got this right?
>
> TNX . . 73 .. Ken - VE5KC
>
> E-Mail - ve5kc@qsl.net
> - fsr567@sk.sympatico.ca
>
> Web sites:
> KC's Amateur Radio Page - http://www.qsl.net/ve5kc/
> KC's Canada Page - http://www3.sk.sympatico.ca/fsr567/Canada.html
>
> --
> FAQ on WWW: http://www.contesting.com/tentecfaq.htm
> Submissions: tentec@contesting.com
> Administrative requests: tentec-REQUEST@contesting.com
> Problems: owner-tentec@contesting.com
> Search: http://www.contesting.com/km9p/search.htm
>
--
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|