thank you
jack
ak7o
-----Original Message-----
From: Jack Dold, W9OWO
Sent: Saturday, December 15, 2012 7:36 PM
To: 'Discussion of Ten-Tec Equipment'
Subject: Re: [TenTec] audio from the I/O connection at the back of the Orion
Jack:
Under [Menu], [Other]: You can use [Line out Level] to select Low, Medium or
high. Default is High. That should correct your problem. Good luck!
73, Jack, W9OWO
-----Original Message-----
From: TenTec [mailto:tentec-bounces@contesting.com] On Behalf Of jack
Sent: Saturday, December 15, 2012 1:35 PM
To: Discussion of Ten-Tec Equipment
Subject: [TenTec] audio from the I/O connection at the back of the Orion
Question: is there a way to turn down the audio gain from the I/O DIN
connection on the back the Orion?
I have 2 Orions and have them connected to a Yankee Clipper SO2R+ which
feeds the audio thru to headphones. turning down the main and sub AF gain
does NOTHING to the I/O gain thru the DIN connector.
there is much too much volume in the headphones. the output is so loud thru
the SO2R box that I can use the headphones as a speakers. in fact right now
I am listening without problem to a CW chat on 17 meters with the headphones
on the desk.
thanks,
jack
ak7o
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.2221 / Virus Database: 2637/5462 - Release Date: 12/15/12
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|