TenTec
[Top] [All Lists]

[TenTec] 217 Filter question

To: <tentec@contesting.com>
Subject: [TenTec] 217 Filter question
From: vbbond@ix.netcom.com (vbbond@ix.netcom.com)
Date: Mon, 04 Oct 1999 20:24:46 -0700
Robert wrote:
> 
> Well,
> 
>   I have the 217 in N-1 and 218 in N-2... The N-2 setting makes a very
> distinct difference in the overall filtering of the Omni VI+, but when I
> put in N-1 (217) I can hear zero difference.. I have checked, and yes, the
> filter is plugged in correctly, and the jumper is between 1-2 as per the
> instructions.. Is this normal operation for this filter? It seems to be
> doing almost nothing at all, at least as far as my ears can tell....

Robert:
    My setup is exactly backwards of yours: I have the 218 in N1 and the 
217 in N2. On CW I note a distinct difference between the two. The 500Hz 
TT217 is very narrow and the 1.8KHz TT218 is squeaky but less narrow. ON 
SSB, the TT218 is squeaky but SSB signals can be copied throgh it. When 
switching to the TT217, SSB signals are all but unreadable. It sounds as 
if your 500Hz filter is not functioning properly.

                                  Vince/K7NA

--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>