Re: [TenTec] When did Ten-tec switch to Schottky diode ring mixers?

[George K3GP <k3gp@arrl.net>]

Kevin Purcell wrote:
> Excellent. Thanks Steve for that data point. And Don, NN8B, who  
> replied too. Both have the Corsair 2.
> So they had switched by 1986.
>
> Anyone with an original Corsair (Corsair 1, so to speak)? I think  
> that might be the rig they made the switch to schottky diodes.
> It would just take a second to check the schematic in the manual on  
> the RF Mixer board :-)
My original corsair manual lists the mixer diodes on the RF mixer board 
(D9 thru D12) as MBD-101  which checks out to be 7v low noise shottky 
diodes.
333-3333
George K3GP